Going Live Remote
Download Ladiocast
https://apps.apple.com/ca/app/ladiocast/id411213048?mt=12
If you’re using an audio interface, make sure it is selected as the audio source in your system audio.
Setup the streaming in Laudiocast
This is a typical situation for a one-person, live from home, radio show using an external mixer.
Open LadioCast.
Input = Your audio interface or system audio
Main Output = System Output
NOTE: make sure that channels read 1&2 to the left of the meters for stereo.
Streaming
Go to LadioCast Menu >> Streamer >> Streamer 1 >> icecast
The settings should read as this:
NOTE: The password will always change. Contact station@chmafm.com for the most recent password.
And:
And also double check the setting under LadioCast >> Settings:
When you’re good to go you just need to press “Connect”
LaudioCast Menu >> Streamer >> Streamer 1 >> Icecast >> Connect
You can always check https://chma.airtime.pro/. If it says “Live DJ” then you’re live!
You could also test it by visiting https://chma.out.airtime.pro/chma_a and listening for your audio. Please only check the stream when you know it’s not being used, generally from 1am-5pm. Do not check during the evenings or weekends unless you’ve been given a time to do so.
*IMPORTANT*
Remember that your slot is timed, so you won’t be live until your timeslot and you’ll be cut out automatically when the show is over at the end of your timeslot. It’s also very important to note that you can mistakenly interrupt someone else’s show by trying to go live while they’re also going live remotely or being aired from Airtime Pro. These are mostly evening and weekend shows.
And as always, feel free to reach out to James at station@chmafm.com and 506.364.9243.
It’s best to schedule a time for a test once you’ve installed and set-up the apps.
